01With the exception of the Baby, the 0 is our smallest guitar and is offered with the same shorter scale found on the 12-fret 00. Although measuring only 13.5 inches in width (smaller than a typical classical guitar), the Collings 0 has tone and volume that belies its first impression as being less than full-sized. It can double as a travel guitar or a small OM, performing both roles equally well. The same neck and woods options offered with larger Collings models are available on the 0 as well, giving players an almost infinite range of tonal possibilities.
From the starting point of the wood's density and rigidity, each acoustic guitar top is hand selected, evaluated, and carved to its own unique thickness; maximizing the tonal potential of each top.
Each Collings acoustic guitar, from our most affordable model to the highest end, are built with the finest tonewoods available. Each wood is acquired, acclimated, and hand selected by master luthiers here at our shop who pick each component with the whole tonality of the end instrument in mind.
A combination of exacting PLEK machine leveling and hand fret dressing ensures consistently excellent playability and a silky fret feel.
By meticulously hand-sanding between coats, our nitrocellulose lacquer finishes measure between .005 and .007 inches in final thickness, maximizing acoustical response while providing excellent protection and aesthetics.
Premium Waverly open gear tuners offer exceptional tuning stability and smooth reliable operation.
Tortoiseshell binding compliments the warm hues of a mahogany back and sides. A black and white wood rosette and mother of pearl dot inlays complete the simple but elegant 1-style appointments.
Short Scale Length
A short 24 7/8 inch scale creates a warm note attack and lower tension string feel that lends itself well to a variety of playing styles.
|Back & Sides||Honduran mahogany|
|Body Binding||Tortoise with b/w/b/w top purfling|
|Bridge||Ebony belly-style with 2 3/16" spacing|
|Fingerboard||Ebony with MOP short dots|
|Bridge Pins/End Pin||Ebony with MOP dot|
|Nut||Bone, 1 11/16"|
|Neck Profile||Modified V|
|Peghead Profile||Tapered square|
|Neck Joint||Mortise & tenon hybrid|
|Truss Rod||Fully adjustable|
|Frets||Medium 18% nickel-silver|
|Peghead Veneer||Ebony with MOP Collings logo|
|Tuners||Nickel Waverly (16:1 ratio)|
|Scale Length||24 7/8"|
|Brace Material||Sitka spruce|
|Brace Pattern||Pre-war scalloped X-brace|
|Fingerboard Radius||14" - 26" compound|
|Body Finish||High gloss nitrocellulose lacquer|
|Neck Finish||High gloss polyester resin|
|Strings||D'Addario EJ-16 (.012"- .053")|
|Case||Deluxe Hardshell case by TKL|